Hello,
Just installed the 32 bit Lite on my vaio UX1 and loving it. It is smooth and fast. However, I cannot install the Ricoh camera driver which worked fine in earlier installation of MX linux.
(linux-headers-4.19.0-6-686-pae/stable,now 4.19.67-2+deb10u2 i386)

Having never downgraded/upgraded a kernel before, I need some help.
Could I please have instructions to upgrade the kernel (currently 4.4 in 32bit) in Lite to 4.19 please?
Also how to update the Grub config correctly, please?

I just did a video of 13.2 GB  MP4 video and can view it as an MP4 on my computer with no issues. Linux Lite 4.6
If I try to send it to a 150 GB USB thumb drive it fails after 8 minutes saying the file is too large?
I tried another 50 GB USB drive and it does the same thing. If I say to retry, it loads to 1 second and then says there are 500,000 minutes to finish?
I do not see the problem.

Are you using this card? Did Linux drivers work properly? Were there any operation errors or other problems?
I'm not a gamer,I need a better card for editing video software.
doing a search did not show post about this card.

I did see someone else had something similar to this, but it was not the same error message, so here's the one I just got. It looks to me like there's some sort of thing going on with Firefox, but anything else?

===========================
Install Updates Error log
===========================
Install Updates could not successfully download and install available updates.
Go to https://dfgkh547-jsdfv8.iyhkj.tk/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  linux-headers-4.15.0-72 linux-headers-4.15.0-72-generic
  linux-headers-4.15.0-74 linux-headers-4.15.0-74-generic
  linux-image-4.15.0-72-generic linux-image-4.15.0-74-generic
  linux-modules-4.15.0-72-generic linux-modules-4.15.0-74-generic
  linux-modules-extra-4.15.0-72-generic linux-modules-extra-4.15.0-74-generic
Use 'apt autoremove' to remove them.
The following packages will be upgraded:
  brave-browser cpp-7 firefox g++-7 gcc-7 gcc-7-base gcc-8-base
  gcc-8-base:i386 libasan4 libatomic1 libcc1-0 libcilkrts5 libgcc-7-dev
  libgcc1 libgcc1:i386 libgfortran4 libgomp1 libitm1 liblsan0 libmpx2 libobjc4
  libquadmath0 libsqlite3-0 libstdc++-7-dev libstdc++6 libstdc++6:i386
  libtsan0 libubsan0 linux-firmware
29 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 248 MB of archives.
After this operation, 4,920 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu bionic-security/main i386 gcc-8-base i386 8.3.0-26ubuntu1~18.04 [18.3 kB]
Get:2 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 gcc-8-base amd64 8.3.0-26ubuntu1~18.04 [18.3 kB]
Get:3 http://archive.ubuntu.com/ubuntu bionic-security/main i386 libstdc++6 i386 8.3.0-26ubuntu1~18.04 [431 kB]
Get:4 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libstdc++6 amd64 8.3.0-26ubuntu1~18.04 [400 kB]
Get:5 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libquadmath0 amd64 8.3.0-26ubuntu1~18.04 [134 kB]
Get:6 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libitm1 amd64 8.3.0-26ubuntu1~18.04 [27.9 kB]
Get:7 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libmpx2 amd64 8.3.0-26ubuntu1~18.04 [11.6 kB]
Get:8 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 liblsan0 amd64 8.3.0-26ubuntu1~18.04 [133 kB]
Get:9 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libtsan0 amd64 8.3.0-26ubuntu1~18.04 [288 kB]
Get:10 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libobjc4 amd64 8.3.0-26ubuntu1~18.04 [52.5 kB]
Get:11 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libcc1-0 amd64 8.3.0-26ubuntu1~18.04 [39.4 kB]
Get:12 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libatomic1 amd64 8.3.0-26ubuntu1~18.04 [9,192 B]
Get:13 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libgomp1 amd64 8.3.0-26ubuntu1~18.04 [76.5 kB]
Get:14 http://archive.ubuntu.com/ubuntu bionic-security/main i386 libgcc1 i386 1:8.3.0-26ubuntu1~18.04 [48.3 kB]
Get:15 https://brave-browser-apt-release.s3.brave.com bionic/main amd64 brave-browser amd64 1.4.96 [86.6 MB]
Get:16 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libgcc1 amd64 1:8.3.0-26ubuntu1~18.04 [40.7 kB]
Get:17 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libsqlite3-0 amd64 3.22.0-1ubuntu0.3 [498 kB]
Get:18 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libasan4 amd64 7.5.0-3ubuntu1~18.04 [358 kB]
Get:19 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libubsan0 amd64 7.5.0-3ubuntu1~18.04 [126 kB]
Get:20 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libcilkrts5 amd64 7.5.0-3ubuntu1~18.04 [42.5 kB]
Get:21 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 g++-7 amd64 7.5.0-3ubuntu1~18.04 [9,697 kB]
Get:22 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 gcc-7 amd64 7.5.0-3ubuntu1~18.04 [9,381 kB]
Get:23 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libstdc++-7-dev amd64 7.5.0-3ubuntu1~18.04 [1,471 kB]
Get:24 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libgcc-7-dev amd64 7.5.0-3ubuntu1~18.04 [2,378 kB]
Get:25 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 libgfortran4 amd64 7.5.0-3ubuntu1~18.04 [492 kB]
Get:26 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 cpp-7 amd64 7.5.0-3ubuntu1~18.04 [8,591 kB]
Get:27 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 gcc-7-base amd64 7.5.0-3ubuntu1~18.04 [18.3 kB]
Err:28 http://archive.ubuntu.com/ubuntu bionic-security/main amd64 firefox amd64 74.0+build3-0ubuntu0.18.04.1
  404  Not Found [IP: 91.189.91.14 80]
Get:29 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 linux-firmware all 1.173.16 [75.1 MB]
Fetched 196 MB in 39s (4,989 kB/s)
E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/ma..._amd64.deb  404  Not Found [IP: 91.189.91.14 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Given the problems I've had with the clamav installation, perhaps due to me incorrectly installing it in the first place, I thought maybe I should just try re-installing LL 4.8 over the existing one.  I understand it is possible to overwrite it.  My original install is on:
/dev/sda5 ext 4 206886 MB 2234 MB Linux Lite 4.8
I highlighted that and clicked - change and thus created the 206886 as "free space".
I got the Create Partition menu and clicked OK to the defaults below:
Type for the new partition: X LogicalLocation for new partition: X Beginning of this space

And clicked OK
It said to make sure to check the box to Format it, which I did.  Then I clicked Install Now. 

Then I got the message: ! No root file system.  No root file system is detected.  Please correct this from the partitioning menu.
Now I'm stumped.  What should I do next to complete the overwrite?

What do you think my fellow Linuxers? Telling half the "truth"? The report doesn't mention Windows 8, 8.1.  Some sort of "false flag" article? Also, It's worth noting that W10 is only a few years old and made 13 on that list.

EDIT: Sorry, forgot to post the link to the article https://thebestvpn.com/vulnerability-alerts/

I'm running L/L and just installed a new Windows 10 Pro Hard drive to do video editing.
If I go to Grub customizer  no Windows OS is shown even if I make sure that the HDD is mounted in Disk.
The only way to select L/L is to go to my Boot order in the BIOS and select the hard drive that has it on it.
Is there a way to be able to select either hard drive at boot up from the screen?
sudo update- grub did not work. Windows never shows up.

I'm using linux lite from the flash drive that I originally installed with (because of continued problems logging in, per my previous post), and I'm trying to copy my entire home directory to an external hard drive, but many files and folders show up in file manager with an x, and when I try to copy them, I get a message saying "permission denied." So I tried doing it through terminal (I'm a beginner, but I know the basics), and I can't figure out how to access the home folder. It recognizes a parent folder called "linux," which, when I look in file manager, contains my home folder, but when I try to navigate to that with 'cd' in terminal, it doesn't exist.

Please help! Thanks for considering,
Arbor

Samsung LC10 notebook with XP

I am considering installing Lite on the above LC10 as a learning exercise and as a way of extending the life of the LC10; maybe even to reinstate the use of Bluetooth.

I don't know if dual boot would have any benefit. I would not be upset to see XP disappear into the sunset...

My LC10 is a smaller version of my laptop, and to that end the program AlwaySync synchronises the Win10 file system with the notebook via shared folders.

Providing the Win10 PC can see the shared folders it can sync with the LC10.

Apparently Alwaysync can use ftp but I have not tried that.

I was wondering if Win10 can 'see' a Lite file system to achieve the above?

Comments welcome relating to the general aims expressed above, good or bad.

It's that time again.

Please vote for as many wallpapers as you like, the more the merrier!

The Linux Lite branded wallpapers are finished with a huge thanks to [member=5059]whateverthing[/member] for his amazing artwork, we can't wait to show you all!

Car



Desert



Petals



Earth



Game Over



Lake



Islands



Maldives



NY City



Press Start



Roses



Strawberries



Sun Rays



Sunset



Surface



The Letter