Skullcandy Soundmine Bluetooth external speaker

[rokytnji]

Works on my chromebook so not a hardware problem.  Unfortunstely  my Linux-Lite laptops I have to use a external usb/bluetooth dongle adapter. My Chromebook has a internal bluetooth card.


This is the unit: http://www.amazon.com/Skullcandy-Soundmi...B00NCD8WO8
exactly. Same color and everything. It was a Christmas present.



This is just a starter post so feel no need to reply. I have a feeling my problem is the bluetooth sending unit that uses a usb port for the interface. I will supply screenshots later on to show what errors out and what graphic errors say.


Jerry knows I am not afeared of command line or command syntax. I am starting this thread using my Chromebook because I 1st wished to make sure the speaker worked before starting this thread. Also starting this thread because the speaker unit is so new. No Linux documentation exists for it. I am not going to include the ChromeOS audio stream dump as it is miles long, and probably not relevant anyways.
Forum Code blocks screwing with technical report posting reply so


http://pastebin.com/m84wMeAB


I will respond at a later date my findings using Linux-Lite using this Skullcandy Soundmine Bluetooth speaker with Blueman and Bluez


Long story short without screen shots. Blueman sees the soundmine speaker. Pairs OK. But does not connect completely anyways. So no sound from it.
That is why I will include step by step screenshots with this thread when I am on my Linux Lite box.
Probably the wheeled on a portable table  Dell 755 wireless Tower I use in my shop.


So like I said. Do not feel a need to respond till I get my next post in with what I am trying on Linux-Lite. In detail.


Edit: Just tested on my Iphone 5S with IOS 9.2. Works on it also. Just added info for the thread. Not a comparison or whining.


Happy Trailz, Rok

[rokytnji]

Test on my DellXT2 Touchscreen laptop with

Code:

harry@harry-Latitude-XT2:~$ linuxinfo
Linux harry-Latitude-XT2 4.2.0-linuxlite #1 SMP Mon Aug 31 14:54:58 NZST 2015
Two Intel Unknown 1200MHz processors, 6379.36 total bogomips, 5004M RAM
System library 2.19.0
harry@harry-Latitude-XT2:~$ inxi -S
System:    Host: harry-Latitude-XT2 Kernel: 4.2.0-linuxlite i686 (32 bit)
           Desktop: Xfce 4.11.8 Distro: Ubuntu 14.04 trusty

Command line readout next. Using audio sink & then using setup. Speaker is set up as trusted.

Code:

harry@harry-Latitude-XT2:~$ blueman-manager
Loading configuration plugins
Using gconf config backend
_________
Load (/usr/lib/python2.7/dist-packages/blueman/main/PluginManager.py:54)
['Services', 'PulseAudioProfile']
_________
__load_plugin (/usr/lib/python2.7/dist-packages/blueman/main/PluginManager.py:127)
loading <class 'blueman.plugins.manager.Services.Services'>
_________
__load_plugin (/usr/lib/python2.7/dist-packages/blueman/main/PluginManager.py:127)
loading <class 'blueman.plugins.manager.PulseAudioProfile.PulseAudioProfile'>
_________
pa_context_event (/usr/lib/python2.7/dist-packages/blueman/main/PulseAudioUtils.py:306)
1
blueman-manager version 1.23 starting
_________
pa_context_event (/usr/lib/python2.7/dist-packages/blueman/main/PulseAudioUtils.py:306)
2
_________
on_bluez_name_owner_changed (/usr/bin/blueman-manager:112)
org.bluez owner changed to  :1.1
Using gconf config backend
_________
SetAdapter (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:276)
None
_________
on_adapter_changed (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerToolbar.py:70)
toolbar adapter /org/bluez/492/hci0
_________
__init__ (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:16)
caching initial properties
_________
add_device (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:330)
adding new device
_________
do_cache (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:522)
Caching new device D0:8A:55:06:9D:D4
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Fake False
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Trusted 1
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Paired 1
_________
init_services (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:73)
Loading services
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
pa_context_event (/usr/lib/python2.7/dist-packages/blueman/main/PulseAudioUtils.py:306)
3
_________
pa_context_event (/usr/lib/python2.7/dist-packages/blueman/main/PulseAudioUtils.py:306)
4
_________
on_pa_ready (/usr/lib/python2.7/dist-packages/blueman/plugins/manager/PulseAudioProfile.py:27)
connected
_________
<lambda> (/usr/lib/python2.7/dist-packages/blueman/main/PulseAudioUtils.py:318)
1
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
set_op (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:75)
op: regenerating instance <ManagerDeviceMenu object at 0xb57282ac (GtkMenu at 0xa5453d8)>
_________
set_op (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:75)
op: regenerating instance <ManagerDeviceMenu object at 0xb571a194 (GtkMenu at 0xa5454d8)>
_________
on_device_property_changed (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:168)
list: device_prop_ch Connected 1 /org/bluez/492/hci0/dev_D0_8A_55_06_9D_D4 () {}
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Connected 1
_________
monitor_power_levels (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:190)
starting monitor
_________
level_setup_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:347)
animating up
_________
unset_op (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:89)
op: regenerating instance <ManagerDeviceMenu object at 0xb57282ac (GtkMenu at 0xa5453d8)>
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
unset_op (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:89)
op: regenerating instance <ManagerDeviceMenu object at 0xb571a194 (GtkMenu at 0xa5454d8)>
_________
fail (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:119)
fail (DBusException(dbus.String(u'Stream setup failed'),),)
/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerProgressbar.py:174: Warning: Source ID 347 was not found when attempting to remove it
  gobject.source_remove(self.gsource)
_________
on_device_property_changed (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:168)
list: device_prop_ch Connected 0 /org/bluez/492/hci0/dev_D0_8A_55_06_9D_D4 () {}
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Connected 0
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
level_setup_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:347)
animating down
_________
update (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:191)
stopping monitor (not connected)
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
Loading configuration plugins
Using gconf config backend
_________
SetAdapter (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:276)
None
_________
__init__ (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:16)
caching initial properties
_________
add_device (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:330)
adding new device
_________
do_cache (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:522)
Caching new device D0:8A:55:06:9D:D4
_________
__init__ (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:16)
caching initial properties
_________
init_services (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:73)
Loading services
{u'control': <blueman.bluez.ServiceInterface.ServiceInterface object at 0xadcc870c>, u'audiosink': <blueman.bluez.ServiceInterface.ServiceInterface object at 0xadcc862c>, u'introspectable': <blueman.bluez.ServiceInterface.ServiceInterface object at 0xadcc852c>, u'audio': <blueman.bluez.ServiceInterface.ServiceInterface object at 0xadcc850c>}
connect
_________
on_device_property_changed (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:168)
list: device_prop_ch Connected 1 /org/bluez/492/hci0/dev_D0_8A_55_06_9D_D4 () {}
_________
on_device_property_changed (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:168)
list: device_prop_ch Connected 1 /org/bluez/492/hci0/dev_D0_8A_55_06_9D_D4 () {}
_________
monitor_power_levels (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:190)
starting monitor
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Connected 1
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
monitor_power_levels (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:190)
starting monitor
_________
level_setup_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:347)
animating up
_________
on_device_property_changed (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:168)
list: device_prop_ch Connected 0 /org/bluez/492/hci0/dev_D0_8A_55_06_9D_D4 () {}
_________
on_device_property_changed (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:168)
list: device_prop_ch Connected 0 /org/bluez/492/hci0/dev_D0_8A_55_06_9D_D4 () {}
_________
row_update_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:286)
row update event Connected 0
_________
Generate (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceMenu.py:215)
Soundmine
_________
level_setup_event (/usr/lib/python2.7/dist-packages/blueman/gui/manager/ManagerDeviceList.py:347)
animating down
_________
update (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:191)
stopping monitor (not connected)
_________
update (/usr/lib/python2.7/dist-packages/blueman/gui/DeviceList.py:191)
stopping monitor (not connected)
_________
child_closed (/usr/lib/python2.7/dist-packages/blueman/Functions.py:153)
['/usr/bin/blueman-assistant', u'--device=D0:8A:55:06:9D:D4'] closed
harry@harry-Latitude-XT2:~$

screenshots to visually show gtk errors
[img height=500 width=800]http://i.imgur.com/0HnKyin.png[/img]


[img height=500 width=800]http://i.imgur.com/pnN5Kzc.png[/img]

[img height=500 width=800]http://i.imgur.com/YLA4nYU.png[/img]

[img height=500 width=800]http://i.imgur.com/kqjZj6i.png[/img]

Code:

harry@harry-Latitude-XT2:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Code:

harry@harry-Latitude-XT2:~$ lsusb -t
/:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 2, Class=(Defined at Interface level), Driver=, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Application Specific Interface, Driver=, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
harry@harry-Latitude-XT2:~$

asyou can see.btusb driver is loading OK for the bluetooth dongle. That does not mean how ever this
unit is linux friendly.

What I have plugged in my usb port

Mini USB 2.0 Bluetooth 4.0 CSR4.0 +EDR Dongle Adapter for PC WIN 8 7 XP VISTA A+


I also have one of these
which I tried first. But got the same errors as the above. So I figured I would try bluetooth 4.0 instead. Hoping a newer unit might rectify the problem. But I guess not. This is not Linux-Lite specific because Mint 17 Mate gives the same errors with the cheaper bluetooth dongle. I have not tried the Bluetooth 4.0 adapter yet in Mint 17. But I expect the same results. Since both are based on Ubuntu 14.04.

Happy Trailz, Rok

[valtam]

May be of use - https://bugs.launchpad.net/ubuntu/+sourc...ug/1221995 seems it could be fussy with kernel choice.

[rokytnji]

May be of use - https://bugs.launchpad.net/ubuntu/+sourc...ug/1221995 seems it could be fussy with kernel choice.

Will give it a boot change to a different kernel. Just not on this laptop to check. Because

Code:

$ dpkg --list | grep linux-image
ii  linux-image-linuxlite-3.19.0          0010                                         i386         Linux kernel binary image for version 3.19.0-linuxlite
ii  linux-image-linuxlite-4.1.0           0010                                         i386         Linux kernel binary image for version 4.1.0-linuxlite
ii  linux-image-linuxlite-4.2.0           0010                                         i386         Linux kernel binary image for version 4.2.0-linuxlite

Because your link points at 3.10 and I need to check what old kernels I may have kept around .
Also. That bug report mentions.

device simply doesnt appear on bluetooth manager. blueman UI is broken.

I will be approaching this issue methodically and with patience in mind.
Next is to try on my Mint 17 Mate 64 bit install on my Samusng rv410 laptop.
I will post my findings and specs on it later on in my next post.

One Idea I am pondering. I recieved a mini cd disk with the 4.0 bluetooth dongles for the Windows drivers.
Maybe NDIS-GTK (loading windows .inf file) and blacklisting btusb driver may be a experiment worth trying out later on.

No hurry on my end for this yet. Being cautious before proceeding too fast on this.
I'd like to see a linux fix. Instead of using the cd and windows driver.
That kinda defeats the purpose of this thread. But I may try the cd route just to see if it works.
Then if it does. Uninstall the Windows .inf file in NDIS-GTK. Then un-blacklist  the btusb driver.
To bring everything back to stock.

This is mostly just a self learning exercise for this biker.

[N4RPS]

Hello, Rok!

Pardon my joining the party late, but have you looked at this?

https://dfgkh547-jsdfv8.iyhkj.tk/forums/netwo...inux-lite/

I have to use this tutorial to get A2DP Bluetooth going every time I do a new install - not just on LL, but on a lot of other Linux OSes as well...

73 DE N4RPS
Rob

[rokytnji]

Thanks for the pointer. No. I missed that. But my search was screwed from the git go using "skullcandy soudmine" in the search box. Thanks again. I will give it a go later on.

[rokytnji]

N4RPS post is the best answer.

I edited

Code:

harry@harry-Latitude-XT2:~$ cat /etc/bluetooth/audio.conf
# Configuration file for the audio service

# This section contains options which are not specific to any
# particular interface
[General]

Enable = Source,Sink,Headset,Gateway,Control,Media
Disable = Socket

HFP=false

[A2DP]
SBCSources=1
MPEG12Sources=0

# Switch to master role for incoming connections (defaults to true)
#Master=true

# If we want to disable support for specific services
# Defaults to supporting all implemented services
#Disable=Gateway,Source,Socket

# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
# Defaults to HCI
#SCORouting=PCM

# Automatically connect both A2DP and HFP/HSP profiles for incoming
# connections. Some headsets that support both profiles will only connect the
# other one automatically so the default setting of true is usually a good
# idea.
#AutoConnect=true

# Headset interface specific options (i.e. options which affect how the audio
# service interacts with remote headset devices)
[Headset]

# Set to true to support HFP, false means only HSP is supported
# Defaults to true
HFP=true

# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
MaxConnected=1

# Set to true to enable use of fast connectable mode (faster page scanning)
# for HFP when incoming call starts. Default settings are restored after
# call is answered or rejected. Page scan interval is much shorter and page
# scan type changed to interlaced. Such allows faster connection initiated
# by a headset.
FastConnectable=false

# Just an example of potential config options for the other interfaces
#[A2DP]
#SBCSources=1
#MPEG12Sources=0
harry@harry-Latitude-XT2:~$

using these instructions

Code:

sudo leafpad /etc/bluetooth/audio.conf

continued with Quote below. You can see my results in above code tag readout using the cat command . That is what your file should look like when done.

[General]

Enable = Source,Sink,Headset,Gateway,Control,Media
Disable = Socket

HFP=false

[A2DP]
SBCSources=1
MPEG12Sources=0

Then continued with these instructions


First, add the PPA:

Open a terminal window [CTRL-ALT-T] and enter the following:

Code: sudo add-apt-repository ppa:cschramm/blueman
Enter the sudo password, and you should see this:

More info: https://launchpad.net/~cschramm/+archive/blueman
Press [ENTER] to continue or ctrl-c to cancel adding it

Press ENTER to add the PPA. After it is added, enter the following text:

Code: sudo apt-get update && sudo apt-get install blueman pavucontrol pulseaudio-module-bluetooth -y
If you get any messages (you shouldn't) saying these are already installed, they can be ignored.

If your Bluetooth adapter is not Broadcom-based, you may reboot now.


My comment now. My bluetooth adapter is not broadcom so all I needed was a reboot.
Then open Bluetooth-Manager (Blueman) and use sink on right click menu to add the speaker (Soundmine)
to pulse audio controls. I now have working sound on my Skullcandy Soundmine external speaker.
There is no slider control to move in pulse audio for Soundmine. Just a bar

[img height=500 width=800]http://i.imgur.com/r7s23WN.png[/img]

So issue with Skullcandy Soundmine with external usb 4.0 dongle is considered solved by me.
This I bet is the only Ubuntu 14.04 Skullcandy Soundmine hit on the net I bet.
So I expect a lot of hits on this thread.

Edit: Volume controls added in pulse audio after I ran setup in Blueman.

Edit2: Works good also on my Dell e5500 laptop with this bluetooth dongle

http://www.ebay.com/itm/New-Wireless-Min...SwPe1T~~NI

Dell e5500 specs:

Code:

harry@biker1:~$ inxi -Fxz
System:    Host: biker1 Kernel: 4.2.0-linuxlite i686 (32 bit gcc: 4.8.4)
           Desktop: Xfce 4.11.8 (Gtk 2.24.23) Distro: Ubuntu 14.04 trusty
Machine:   System: Dell product: Latitude E5500
           Mobo: Dell model: 0DW635 Bios: Dell v: A17 date: 09/27/2011
CPU:       Dual core Intel Core2 Duo T7250 (-MCP-) cache: 2048 KB
           flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 7973
           clock speeds: max: 2001 MHz 1: 800 MHz 2: 2001 MHz
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.15.1 drivers: intel (unloaded: fbdev,vesa)
           Resolution: [email protected]
           GLX Renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2
           GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.2.0-linuxlite
Network:   Card-1: Broadcom NetXtreme BCM5756ME Gigabit Ethernet PCI Express
           driver: tg3 v: 3.137 bus-ID: 09:00.0
           IF: eth1 state: down mac: <filter>
           Card-2: Broadcom BCM4312 802.11b/g LP-PHY
           driver: b43-pci-bridge bus-ID: 0c:00.0
           IF: wlan2 state: up mac: <filter>
Drives:    HDD Total Size: 121.3GB (77.5% used)
           ID-1: /dev/sda model: APPLE_SSD_SM128 size: 121.3GB
Partition: ID-1: / size: 8.6G used: 6.3G (79%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 103G used: 82G (84%) fs: ext3 dev: /dev/sda2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 49.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 183 Uptime: 32 min Memory: 574.6/1971.2MB
           Init: Upstart runlevel: 2 Gcc sys: 4.8.4
           Client: Shell (bash 4.3.111) inxi: 2.2.32

usb id for bluetooth dongle is

Code:

harry@biker1:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub